Hempathane HS 55610 is a glossy polyurethane topcoat, cured with aliphatic isocyanate. The product has very good gloss and colour retention and contains zinc phosphate. Complies with EU Directive 2004/42/EC. For severely corrosive atmospheric environment. Direct-to-metal in C2 and C3 environments. Glossy with very good gloss and colour retention. High volume solids and VOC-compliant. The minimum temperature for curing is -10°C [14°F]. Hempathane HS 55610 is recommended as VOC compliant, high-build finishing coat for protection of structural steel in severely corrosive environment. The product may be specified as a one coat ''direct to metal'' system in environments classified as C2 and C3. It may also be applied directly on galvanised steel. read more

Jotamastic Smart Pack HB is a high-build surface-tolerant epoxy mastic primer designed for brush and roller. It comes in an easy to mix 1:1 mixing ratio making it ideal for smaller maintenance and repair jobs. It is specially designed for areas where optimal surface preparation is not possible or required. It provides long lasting protection in environments with high corrosivity. It can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments.   Key features Made for brush and roller High build 1:1 easy mixing NORSOK compliant Surface-tolerant Easy to achieve smooth film build Technical details Product Categories Anticorrosive primersMaintenance primers Technology Epoxy mastic Substrate Carbon steelGalvanized steelStainless steelConcreteCoated surfaces read more

ALKYDPRIMER QD | Alkyd based primer Alkydprimer is an easy to use, one-component oxidatively drying alkyd coating. Alkydprimer has a matt finish and can be applied to any surface on new or aged coating in atmospheric conditions – and is also suitable for use together with Pilot II as a finishing coat. It has a low application cost with minimal waste, requires no mixing and has no pot-life restrictions, lowering your application costs, waste and leftover paint. Alkydprimer is available in black, grey, light grey, red and white.   Available in: 5 litre and 20 litre units.   Typical use: Marine:  Recommended for engines room, store room. Internal Area Protective:  Suitable for a wide range of industrial structures.   Key Features:- Fast drying Alkyd based primer Matt finish For newbuilds and maintenance   Product Generic Type:- Alkyd Based topcoat, and for touch-up purposes. Building - exterior Building - interior Industrial topcoats Exterior steel protection coatings - buildings Interior steel protection coatings - buildings   Substrate Coated surfaces read more